Product range
Truck-mounted cranes for export: 4x2 single-axle, heavy-duty 6x4 and 8x4, semi-trailer mounted, and wrecker trucks with crane. Cranes from WHHC, XCMG, SANY or Zoomlion on SINOTRUK, SHACMAN, Dongfeng, FAW, Foton, Isuzu, JMC or JAC chassis — mounted and supplied as one finished truck.
Dongfeng DFL1250AW2 6x4 crane-truck chassis (Ref. K04W-979). Euro 2 mechanically controlled diesel, 275 kW, 9.5 L, 12-speed synchronized gearbox, 5,600+1,350 mm wheelbase, 25,000 kg GVW, tandem rear axle at 4.44 ratio. Crane selected to your requirement. LHD standard; RHD on request.
Dongfeng DFL5140XXYB1 4x2 crane-truck chassis (Ref. KD6E-976). Euro 2 mechanically controlled diesel, 190 PS, 5.9 L, 8-speed synchronized gearbox, 5,600 mm wheelbase, 14,495 kg GVW, 6 t front and 10 t rear axle. Crane selected to your requirement. LHD standard; RHD on request.
HOWO V7-X 380 HP tractor with a 16 ton Zoomlion 5-section crane and a 3-axle lowbed trailer — 24 m lift height, 22 m working radius, 8.2 m outrigger span and a hydraulic ramp. China V, custom paint. Left-hand drive standard; right-hand drive available on request.
The XCMG SQS125-4 — a 5 t, four-section telescopic crane on an ISUZU 700P 4×2 chassis with a drop-side cargo body. Left-hand drive standard; right-hand drive available on request.
5 t crane on a Dongfeng chassis. 4 boom sections, up to 12.0 m working radius. Left-hand drive standard; right-hand drive available on request.
5 t crane on a Foton chassis. 4 boom sections, up to 12.0 m working radius. Left-hand drive standard; right-hand drive available on request.
12 t crane on a SHACMAN chassis. 5 boom sections, up to 19.5 m working radius. Left-hand drive standard; right-hand drive available on request.
8 t crane on an Isuzu chassis. 5 boom sections, up to 17.6 m working radius. Left-hand drive standard; right-hand drive available on request.
16 t crane on a SITRAK chassis. 5 boom sections, up to 20.4 m working radius. Left-hand drive standard; right-hand drive available on request.
16 t crane on a Isuzu chassis. 5 boom sections, up to 20.4 m working radius. Left-hand drive standard; right-hand drive available on request.
5 t crane on a SINOTRUK HOWO chassis. 4 boom sections, up to 12.0 m working radius. Left-hand drive standard; right-hand drive available on request.
5 t crane on a Isuzu chassis. 4 boom sections, up to 12.0 m working radius. Left-hand drive standard; right-hand drive available on request.
Buyer questions
Order terms, production lead time, documents and market requirements — answered plainly.
Still need help? Send us your destination country and the vehicle you are considering — we reply with what applies to your order.
Need help choosing?
Capacity, boom type and destination country are the three things that decide the model. Send them and we reply with the trucks that fit and the FOB price. Full specification sheets for every model are available on request.
+86 158 0912 4321
Send a message any time. Anything received outside working hours (GMT+8) is answered the next working morning.
For drawings, quotations, shipping documents and technical questions.
Recommended articles
How to read a load chart, how to specify for your market, and how a crane truck is built.
Dirt, water and wear metal cause most crane hydraulic failures. Where contamination enters, how to read the signs early, and a programme that costs little.
How to test boom drift and outrigger creep safely, tell a holding valve from a cylinder seal, and avoid the false diagnosis that wastes parts.
Slow lifting is usually flow, not a worn pump. The four cheap checks in order, what not to adjust, and how to tell a tired pump from a drive fault.
